Supported systems
Hardware support
Software
Documentation
© NeXT 1994
NeXTSTEP is a Unix operating system developed in the 1980s and 90s by NeXT, based on a Mach microkernel with an advanced graphical user interface.
NeXTSTEP supports several 32-bit HP 9000 PA-RISC workstations in release 3.3 from 1994, for which HP and NeXT had high hopes.
This was an effort to open up the NeXT operating system to other hardware platforms after NeXT stopped designing its own custom NeXT computers.
NeXTSTEP, Thomas Schanz CC BY-SA 4.0
Introduced in 1989 by NeXT, NeXTSTEP featured development and user environments, an unique GUI and the Display Post Script (DPS) display system.
The operating system core is a Mach microkernel, 4.3BSD compatible and runtime-extensible.
In its early years, NeXTSTEP only ran on NeXT black hardware, sophisticated and expensive NeXT cubes, based on Motorola 68000.
Intel x86 PCs, white hardware, were first supported in NeXTSTEP 3.1 in 1991 to open up the platform to off-the-shelf hardware.
NeXTSTEP version 3.3 included support for a handful of contemporary HP 9000 700 workstations (712, 715, 725, 735, 755) with good onboard hardware support but admittedly limited software choices.
Third party applications and porting enthusiasm for PA-RISC fell short and the PA-RISC port was limited to NeXTSTEP 3.3 and to thos select set of 32-bit HP 9000 workstations
HP and NeXT advertisement, HP 1994
The PA-RISC version of NeXTSTEP 3.3 was developed on and specifically for the HP 9000 712 pizzabox workstation, a very advanced combination for the 1990s with a nice, integrated user experience.
NeXT tried to get its own NeXT RISC workstation to market (chased a chimera) and looked at Motorola 88000 and PowerPC, but decided to partner with workstation vendors to bring NeXT to RISC.
Development continued and in 1994 NeXTSTEP 3.3 was released with support for different RISC platforms including Sun SPARC and HP PA-RISC.
NeXTSTEP itself, while revolutionary in aspects, did not have long commercial success.
However some of its ideas and technologies live on in Mac OS, after corporate M&A and consolidation in the tech sector.
up
Supported systems
NeXTSTEP 3.3 supports some 32-bit HP 9000 700 PA-RISC workstations from the 1990s:
Class
Supported computers
HP 9000 700
712,
715,
725,
735, 755
Portables
probably SAIC Galaxy 1100
715 NeXTSTEP, Thomas Schanz CC BY-SA 4.0
Most HP 9000 onboard components and integrated devices in compatible HP workstations are supported.
NeXTSTEP ran rather well on HP 9000 712 workstations, on which the 3.3 RISC port was developed.
NeXT provided an unique operating system experience in the early 1990s with an integrated Unix (Mach) system and advanced GUI.
NeXTSTEP on the 712 was where NEXTSTEP belonged all along when HP had been “trying for years to put a human face on UNIX” on its HP 9000 PA-RISC computers.
The serious HP 9000 735/125 workstation was the fastest RISC workstation that ran NeXTSTEP in the 1990s, an interesting contrast between the industrial HP 735 workstation and refined NeXTSTEP operating system with a friendly GUI.
up
Hardware support
NeXTSTEP 3.3 supports most standard hardware of supported PA-RISC workstations:
32-bit PA-RISC PA-7100 or PA-7100LC processors
HP ASP and LASI chipsets
Storage between 400 MB for a user environment to 700 MB for complete developer
32-64 MB RAM with a maximum of 256 MB supported
All onboard graphics and CRX and CRX-24 supported
Onboard communication devices were supported
HCRX and HCRX-24 graphics supported after installation of NeXTSTEP 3.3 patches
Onboard SCSI controllers for storage
PS/2 keyboards only on 712 and 715/64, 80 and 100 workstations, no HIL
HIL keyboards on all other systems
Unsupported on 735/755 are FWD (Fast/Wide Differential) SCSI and FDDI
up
Software
There used be to quite a few commercial productivity and publishing applications available for NeXTSTEP, some of which were ported to PA-RISC and NeXTSTEP 3.3.
This included:
SoftPC 4.0, the PC emulator, was apparently included with or was available for NeXTSTEP, but it is unclear if this applies to the PA-RISC release.
FrameMaker 3.2, the professional DTP program, was ported in 1994 (again) to NeXTSTEP and included PA-RISC versions.
There used to be a large software archive available at the Peanuts.org FTP server.
It went offline about 2004-2005, without a known mirror.
NeXTSTEP Current Patch List (.pdf) Apple Computer 2006, mirror accessed 2009 nextcomputers.org
NeXTSTEP 3.3 User patch NS33RISCUserPatch3.tar and release notes
NeXTSTEP 3.3 Patch 3 Overview (.pdf) Apple Computer 2006, mirror January 2009 nextcomputers.org
NeXTSTEP 3.3 Developer patch NS33DeveloperPatch2.tar nextcomputers.org
up
Documentation
Manuals
NeXTstep 3.3 Network and System Administration Manual, NeXT Software Inc. 1994, mirror accessed December 2019 nextcomputers.org
NeXTstep 3.3 Developer Documentation Manuals,
NeXT Software Inc. 1994, mirror accessed December 2019 nextcomputers.org
Articles
The NEXTSTEP/OpenStep FAQ, Bernhard Scholz 1996, mirror accessed December 2019 levenez
First NeXT RISCWorkstation: Our first look at NEXTSTEP on HP’s low-cost pizza box, NeXTWORLD, April 1994
First NeXT RISCWorkstation (PDF), NeXTWORLD, April 1994 archive.org
NeXTstep on the HP 712 Part 1: Installation, Sophie Haskins, Pizza Box Computer, 2020
https://blog.pizzabox.computer/posts/hp712-nextstep-part-2/, Sophie Haskins, Pizza Box Computer, 2020
up
